ALKO Hex Drive Front Corner Steady 500mm – Bolt-on. 654500G
Steady up…., with AL-KO Quality
Enter destination to get a shipping cost.
Please enter above informations and click calculate button to show estimate shipping results.
A level van makes all the difference when camping and these AL-KO Corner Steadies have been doing so for years with their sturdy & user-friendly design that have won over allot of local caravan manufacturers since. These are the Bolt-on steadies which are a great replacement if you do not wish to weld to the chassis or are just replacing what’s already there as you still get the 500 mm of completely adjustable height with the same a low clearance of a 95 mm when closed and it’s the standard 17-mm hex drive nut for smooth easy winding. Lastly being AL-KO proven quality it’s an all steel construction with zinc plating to keep it in service for years to come.
- Genuine AL-KO Part 654500
- Bolt-on Installation
- Suitable for On-Road Vans as a Front Support
- 500 mm of Adjustable Height
- 95 mm Closed Height Perfect Low Clearance Options
- 400 mm Between Bolt Brackets
- All Steel Construction with Zinc Plating for Durability
- 17-mm Standard Hex Wind Nut
- Has Bracket to Various Take Leg Beds or Leg Supports
Steadies are generally a standard item under your van as you always rely on them to keep your van supported when stationary and the AL-KO ones such as these are a quality replacement. It is important to remember that they are just purely supports and not to be used as lifts for levelling your van as this should be done with ramps and your jockey wheel. If these stabilisers are used as recommended supports combined with a little bit of TLC by keeping the winding thread greased, they will last you a fair while with many years of steady service.