The BreakSafe RM6000 is a genuine remote battery monitor designed to work with the BreakSafe 5000/5000XP and 6000/6000XP break-away kits. It is installed in the towing vehicle and monitors the internal battery of the break-away system each time the vehicle's brake pedal is pressed. If the battery voltage falls below the safe threshold, the monitor alerts the driver with a red light and buzzer; if the battery is healthy, a green light remains on.

Kit Includes: 1 × RM6000 Remote Battery Monitor unit

Compatability: Compatible with BreakSafe 5000, 5000XP, 6000, 6000XP break-away kits only.

Dimensions: approx W 64 mm × D 50 mm × H 22 mm

Two-wire connection: one sensor lead, one earth lead

Operation: Checks battery condition each time brake pedal is pressed. Green = OK, Red + buzzer = low battery.

Required by some Australian states (e.g., NSW) for registration of trailers/ caravans over certain weights.

Frequently Asked Questions 

Q: What exactly does this monitor do?
It monitors the dedicated battery inside the BreakSafe break-away system each time you apply the vehicle brakes. If the battery is below safe limits, the monitor will alert you (red light + buzzer). Green light indicates full charge.

Q: Will this fit my trailer/ caravan?
Only if your trailer uses a BreakSafe 5000/5000XP or 6000/6000XP break-away kit. It will not work correctly with other brands of break-away systems.

Q: Is installation difficult?
Installation involves mounting the monitor on your tow vehicle dash, wiring earth and sensor lead to the break-away kit’s specified terminal.

Q: Does the monitor need power all the time?
Yes , it needs to be connected to the vehicle’s ignition or a suitable 12 V feed so it can monitor when the brakes are applied.

Q: What happens if the red light/buzzer comes on while towing?
Stop safely, check the break-away battery condition, charging circuit, and wiring. Do not ignore the warning as the system may not function in a break-away event.