Suitable for the Fiamma F45 series awnings only.

Converts your Coast Flap Eliminator into an anti flap system to suit the Fiamma box awning in 3 easy steps by adding  Fiamma Awning Adaptor hook Ends along with the Fiamma Awning Adaptor Spigot Ends (sku 200-12432) then fitting the hook brackets inside on the fiamma awning casing.

Step 1: Remove the hook ends from the flap eliminator and add the Fiamma awning adaptor hook ends (sku 200-12434)

Step 2: Remove the spigots from the flap eliminator and add the Fiamma spigot adaptors( sku 200-12432)

Step 3: Mount the hook adaptor brackets (supplied with the anti-flap kit) inside the casing of your Fiamma awning.

The outer end of the elongated bracket should line up with the edge of the awning fabric and 20mm down from the underside of the awning fabric.

In most cases a raised channel runs along inside of the Fiamma awning casing, the brackets are best fitted straight underneath this.

Please Note:

In some Fiamma awnings, there may not be enough clearance beside the shock absorber to fit the bracket that is supplied with your flap eliminator/anti-flap kit.

This should be checked prior to purchasing the adapter kit.

As a general reference, the bracket hole should align with the edge of the awning fabric. If adequate space is not available to install the bracket, this kit will not be compatible with your awning.

To be 100% safe, please ensure there is a minimum of 100mm from the end of the aluminium awning casing (not the plastic ends) to the shock absorber knuckle.