The Fiamma 98655Z197 adapter kit is designed to securely mount a Fiamma F45s  awning to compatible  Ford Transit Custom V710 vehicles.

Suitable for H1 low-roof Ford Custom models from 2023 onward, including selected vehicles fitted with a lifting or pop-top roof, this vehicle-specific bracket kit provides the correct mounting position for L1 and L2 wheelbase models.

The three-bracket design helps support and correctly align the awning along the vehicle roof. Professional installation is strongly recommended, as drilling, adhesive sealing and accurate bracket alignment are required.

Important Information:

Installation should be completed by a qualified caravan, RV or vehicle accessory installer.

This is not a clamp-on installation. The fitting procedure requires drilling into the vehicle roof mounting area, applying a suitable primer and structural adhesive, correctly spacing the brackets and securing the awning to the adapter system.

Fiamma specifies the use of Primer with Sika 554, Teroson MS937 or Dekalin MS5 adhesive for securing the brackets. The brackets must be perfectly aligned before the awning is installed.

Features:

• Vehicle-specific Fiamma awning mounting kit
• Suitable for Ford Transit Custom V710 models
• Compatible with Fiamma F45s
• Suitable for H1 low-roof vehicles
• Compatible with L1 and L2 wheelbase configurations
• Three-bracket mounting system
• Includes model-specific mounting hardware
• Made in Italy

Compatability:

Compatible with:

• Ford Transit Custom V710
• Model year 2023 onward
• H1 low-roof models
• L1 short-wheelbase models
• L2 long-wheelbase models
• Fiamma F45s awning

Compatable awning lengths:

For Ford Custom L1 models:

• Fiamma F45s 2.6m

For Ford Custom L2 models:

• Fiamma F45s 3.0m

These sizes are shown in the Fiamma installation manual for the V710 adapter system.

Not Compatable With:

• High-roof Ford Transit Custom models
• Older Ford Custom models not using the V710 body platform
• Fiamma awnings outside the approved model and size combinations
• Installations where the roof or mounting surface cannot provide sufficient structural support

Specifications:

• Brand: Fiamma
• Product type: Vehicle-specific awning adapter kit
• Fiamma part number: 98655Z197
• Vehicle: Ford Transit Custom V710
• Vehicle roof height: H1 low roof
• Wheelbase compatibility: L1 and L2
• Awning compatibility: Fiamma F45s 
• Number of main mounting brackets: 3
• F45s bracket profile height: approximately 221mm
• F45s overall stand-off shown in manual: approximately 95mm
• Country of manufacture: Italy

Whats Included:

The kit includes the vehicle-specific front, centre and rear mounting bracket assemblies, mounting plates, bolts, washers, nuts and installation hardware shown in the Fiamma fitting instructions.

FAQ

Q: Can I install this kit myself?

Because the installation involves drilling, structural adhesive, bracket alignment and checking door clearances, professional installation is recommended.

Q: Does it suit a Fiamma F45L, F80s or Caravanstore awning?

No. The installation instructions specify Fiamma F45s and F43van awnings only.

Q: Does installation require drilling?

Yes. The fitting procedure requires drilling and permanent mounting to the vehicle.

Q: Does this kit suit the new Ford Transit Custom V710?

Yes. It is designed for Ford Transit Custom V710 models from 2023 onward.

Q: Does it suit both L1 and L2 Ford Custom models?

Yes. The adapter kit supports both L1 and L2 wheelbase vehicles, but the approved awning length differs depending on the vehicle length.

Q: Which Fiamma awnings fit this adapter kit?

The kit is designed for Fiamma F45s