These strong, flexible push rods are designed for use with Jayco Camper Trailers, providing the essential lift action inside the camper’s 3-stage telescopic roof system.

As you wind the crank handle, these rods slide smoothly into the Jayco 3-Stage Lifter Arms, pushing the roof up evenly and reliably. They’re supplied at 66 inches (1676mm) in length and can be trimmed to the required size to perfectly match your camper’s existing setup.

Please Note: These rods are supplied slightly long to allow for trimming  always measure against your original rod before cutting.

Specifcations

Brand: Jayco

Model / SKU: C3121

Other Identifier: TE-CCF-13W / 250-03010

Length: 66 inches (1676mm / approx. 1620mm usable length)

Outer Diameter (OD): 12mm

Inner Diameter (ID): 6.5mm

Material: Flexible, high-strength steel tubing

Application: Jayco camper trailer 3-stage roof lifter system

Installation: Trim to required size and fit into existing lifter arms

Frequently Asked Questions 

Q: What are these rods used for?
These push rods are part of the Jayco Camper Trailer lifter system — they slide up inside the telescopic roof arms to raise the roof when you wind the crank handle.

Q: What length are the rods supplied at?
Each rod is supplied at approximately 66 inches (1676mm). They’re intentionally made slightly long so you can trim them to the correct length during installation.

Q: Can these be used on non-Jayco campers?
They are specifically designed for Jayco 3-stage lifter systems.