Protect your caravan, motorhome or commercial van with a security alarm that is simple to install, easy to operate and designed to make plenty of noise when something isn't right.

The Milenco Caravan Security Remote Alarm provides shock, movement and impact protection inside your vehicle. Once armed using the supplied wireless remote, the system monitors the vehicle and activates the high-output siren if movement or an impact is detected.

Installation is refreshingly simple. The alarm only requires two wires connected to a suitable 12V power source, making it a practical security upgrade without the complicated wiring normally associated with vehicle alarm systems.

The supplied remote also uses code hopping technology. Every time you press the remote, a different security code is transmitted, helping prevent thieves from recording your signal with a code grabber and replaying it later to disarm the system.

Features:

• Designed for caravans, motorhomes and commercial vans
• Shock, movement and impact protection
• Simple two-wire 12V installation
• Wireless remote arming and disarming
• Code hopping remote technology for increased security
• Different transmission code generated each time the remote is used

Specifications:

Brand: Milenco
Part Number: MIL1274
Product Type: Remote Caravan Security Alarm
Power Supply: 12V
Electrical Connection: 2 Wire
Detection: Shock, Movement & Impact
Remote Type: Wireless Code Hopping Transmitter
Remote Channels: 2
Maximum Remotes: 3 per alarm
Panic Function: Yes
Panic Alarm Duration: Approx. 30 Seconds

Remote Function:

Channel 1: Disarm
Channel 2: Arm / Panic
LED: Illuminates when a remote button is pressed

FAQ

Q: What does the Milenco alarm detect?
The system is designed to provide shock, movement and impact protection. Once the alarm is armed, movement or impact inside or around the protected vehicle can activate the siren.

Q: Is this suitable for a caravan?
Yes. It is designed for caravans, motorhomes and commercial vans and can be positioned inside the habitation or cargo area

Q: How difficult is it to install?
The electrical installation is very simple. The alarm requires only two wires connected to a suitable 12V power source.

Q: How do I arm and disarm the alarm?
The alarm is controlled using the supplied wireless remote. The remote has two channels, with Channel 1 used to disarm and Channel 2 used to arm the system or activate the panic function.