Make entering and leaving your caravan or motorhome easier with the Nuova Mapa Tecno Step Double Electric Steps. Electrically extend the two treads when parked and retract them for travel using a compatible control harness.

The anodised aluminium treads measure 575 × 210 mm, with 200 mm vertical spacing between the upper and lower steps.

Wiring harness and mounting bolts are not included.

Features:

• 12 V electric operation: Extend and retract the steps through a compatible control harness.

• Two aluminium treads: Anodised aluminium footrests provide corrosion resistance.

• 200 mm step spacing: Provides an intermediate step between ground level and the vehicle entrance.

• Choice of controls: Standard switch or ignition-linked automatic retraction harness, purchased separately.

• Emergency manual retraction: Mechanical release allows the steps to be folded away if required.

Specifications:

Brand: Nuova Mapa

Range: Tecno Step

Product type: Double electric entry step

Power supply: 12 V DC

Number of treads: Two

Tread material: Anodised aluminium

Supplied tread dimensions: 575 mm wide × 210 mm deep

Vertical distance between upper and lower treads: 200 mm

Motor position: Right-hand side, as specified in the supplied product information

Wiring harness: Sold separately

Mounting bolts: Not included

Measurements ( check images for Diagrams)

• Mounting level to upper tread: 197 mm

• Upper tread to lower tread: 200 mm

• Mounting level to lower tread: Approximately 397 mm

• Folded assembly height: 229 mm

• Transverse mounting-hole centres: 532 mm

• Longitudinal mounting-hole spacing: 118 mm + 35 mm, giving 153 mm between the first and third holes

• Weight of the illustrated version: 11.5 kg

What's Inclusions

• One Nuova Mapa 12 V double electric step assembly with motor

Not Included

• Wiring harness and operating controls

• Mounting bolts

FAQ

Q: Can I operate the steps without purchasing a wiring harness?
A compatible wiring and control system is required. The step assembly is supplied without the harness, so allow for one of the listed options unless you already have a confirmed compatible system.

450-02120  Wiring harness with automatic close on ignition: Automatically retracts the steps when the vehicle ignition is switched on, when correctly connected.

450-02130 Standard wiring harness with switch: Provides an in/out switch that can be mounted near the entrance to extend or retract the steps.

Q: Will the steps automatically retract with the standard harness?
The standard 450-02130 option provides switch control. Ignition-linked automatic retraction is the function identified for 450-02120.