Bring daylight, fresh air and evening illumination into your caravan or motorhome with the MAXXAIR SKYMAXX LX Plus. Open the lid for ventilation while parked, slide the insect screen across to help keep insects outside, or draw the internal blind for shade and privacy. Integrated LED lighting adds interior illumination after dark.

This model suits a 700 × 500 mm roof opening and 23–42 mm roof thickness. The lid, blind and screen operate manually, while the LEDs connect to a suitable 12 V DC supply and a separately supplied wall control.

Features:

• Integrated LED lighting: Interior illumination for evenings at camp.

• Internal blind and insect screen: Adjust shade, privacy and screened ventilation.

• Selectable opening positions: Set the lid position using the manual handle and retaining slots.

• Manual operation: Operate the lid, blind and screen without battery power.

• Configurable passive ventilation: Supplied screen and blank inserts allow the ventilation arrangement to suit the installation.

Specifications:

Brand: MAXXAIR

Model: SKYMAXX LX Plus

Part number: 00-97110iA

Product type: Rooflight with internal blind, insect screen and LED lighting

Required roof cut-out: 700 × 500 mm

Minimum roof thickness: 23 mm

Maximum roof thickness: 42 mm

Lid operation: Manual handle with release button

Blind operation: Manual

Insect screen operation: Manual

Lighting: Integrated LED

LED power supply: 12 V DC

Minimum electrical supply capacity: 2 A

Circuit requirements: Fused supply with appropriately sized stranded wiring

LED control: Separate wall control, provided by installer

Installation orientation: Hinged side facing the front of the vehicle

Travel position: Fully closed and latched

Additional Instilation Information:

• Suitable LED wall control ,  not included

• Fused 12 V DC supply and suitable wiring

• Sealing products compatible with the plastic flange and roof surface

FAQ

Q: Is 700 × 500 mm the opening size or the overall skylight size?
It is the required roof cut-out size, not the overall exterior flange or interior trim measurement. Remove the existing interior trim and measure the actual roof opening before ordering.

Q: Does “23/42 mm” mean it only fits a 23 mm or 42 mm roof?
No. This model is designed for roof thicknesses from 23 mm to 42 mm. The mounting screw length must be selected to suit the measured thickness.

Q: How do I measure my roof thickness?
Measure the complete roof section between the exterior roof surface and the interior ceiling at the opening. Do not include the existing skylight’s trim or lid. The manual instructs installers to check thickness at the mounting holes and measure the thickest section on curved roofs.

Q: Is the LED light switch included?
No. The manufacturer specifies that the wall control must be supplied by the installer.