CARAVAN Stone Shield with Mesh & Reflectors Black (2310mm x 500mm)

protect the front of your caravan or camper trailer from stone chips, gravel rash and road debris, this Caravan Stone Shield is a smart additionfor anyone travelling on highways, gravel roads or outback tracks.

Whether you are heading off the beaten track, travelling behind a 4WD, or simply want better protection on rough country roads, this stone shield helps keep your RV looking cleaner, newer and better protected.

The tough rip stop mesh catches and deflects stones, while the heavy-duty mud flaps help reduce debris flicking underneath the caravan or camper trailer.

Features:

Stone shield with black mesh

Suits caravans

Protects against stone chips and road debris

Tough rip stop mesh

Heavy-duty rubber mud flaps included

ADR compliant bracket and reflector kit included

Mesh screws directly to frame

Pre-drilled holes for assembly

Three-section frame design

Removable with locking R-pins

No need to unbolt brackets for removal

Easy DIY installation

Suitable for A-frame mounting

Specifications:

Colour: Black

Overall Size: 2310mm W x 500mm H

Mounting Type: A-frame mounted

Suitable Drawbar Width: 50mm

Suitable Drawbar Depths: 100mm, 125mm and 150mm

A-Frame Inside Width Required: 415mm to 750mm at attachment point

Straight Middle Section: 960mm

End Sections: 690mm each side

Weight: Approx. 15.1kg - 16kg

Material: Metal frame with rip stop mesh

Mud Flaps: Included

Reflectors: Included

Bracket Kit: ADR compliant bracket and reflector kit included

Fitting Considerations:

Check clearance around the jockey wheel

Check clearance around gas bottles

Check turning circle before fitting

FAQ

Q: What is the Stone Shield made from?
It features a metal frame with tough rip stop mesh and includes two heavy-duty rubber mud flaps.

Q: Can I remove it when not in use?
Yes, the unit unclips from the mounting brackets using locking R-pins, so there is no need to unbolt the brackets.

Q: How is the mesh attached?
The rip stop mesh is screwed directly to the frame using the pre-drilled holes.

Q: What A-frame and drawbar sizes does it suit?
It suits drawbars 50mm wide with depths of 100mm, 125mm or 150mm. The A-frame inside width at the attachment point must be between 415mm and 750mm.

Q: Will the 2.31m stone shield be too big for a caravan around 2.13m wide?
No, the 2.31m shield is suitable for caravans just over 2.13m wide. The extra width helps provide additional protection, especially when turning.

Q: What should I check before fitting?
Check there is enough A-frame space, and confirm clearance for the jockey wheel, gas bottles and vehicle turning circle.

Q: Does it flap around in strong winds?
No – the mesh is tightly screwed to the frame and remains sta